Характеристики
please go through below listing to order coil cable
Single Phase 220V 2500W Smithermal Induction Heat Converter for Plastic Extrusion, Molding heating, Die heating and Tea heating Food processing heating, Oil heating.
Parameters
Item | specification |
Model Number | Smithermal 2500W |
Rated power | 2500W |
Rated voltage | AC 220V/50hZ/60HZ |
Input voltage range | 100-260V,210-260V constant power input |
Work environment temperature | -20-50℃ |
Work environment humidity | ≤95% |
Power adjust | 20%-100% |
Thermal transfer efficient | ≥95% |
Work frequency | 5-40KHZ |
Main circuit structure | Half-bridge series resonance |
Control system | Digital phase-looking automatic tracking |
Application mode | Open application platform |
display | Programmable digital display |
Start time | ＜1s |
Instantaneous over current | ≤2us |
Power overload protection | 130% instant protection |
Soft start mode | 1. with full electrical isolation 2.With 12V and 24V input enable/stop |
Supports PID regulation power | Identify 0-5V input voltage |
Support 0-150℃load temperature detection | Accuracy of ±1℃ |
![]()
Application
Application
Installation Tips
1) Place Fiberglass cotton thickness 15-20mm when flat shape coil, 10-15mm when oval, and
within 10mm when super oval
2) Coil and load distance (thickness of thermal
insulation cotton): 20-25mm when round pipe,
3) Adapted coil parameters: 4mm², Efficient length
11-13m, inductance: 100-150uH measured by LC Meter. (Without load coil inductance value 100uh)
4) Coil Cable use Litz Copper wire 4mm Square with insulation cover is ok. Or purchased on our Smithermal store.
Reference Installation Steps.
More question you can message us through Aliexpress Messenger
Отзывы о 2.5KW 220V Electromagnetic Induction Heater for Plastic Extrusion Pipe Industrial Oil Heating and Customized Heat Application | - 71005002002787518
Отзывы о товарах